The PHL luminaire is a floodlight specially designed for sports facilities: football pitches and stadiums, athletics tracks, tennis courts, etc. With latest-generation LED technology and a range of optical distribution patterns, this luminaire meets the highest standards of performance with exceptional visibility and uniformity.
Technical Data
Desing
- Specially designed for sports facilities.
- Latest-generation LED technology.
Light source
- Contains 16 COB (Chip On Board) LEDs.
- Excellent visibility and uniform spread.
Thermal control
This luminaire is designed for enhanced heat dissipation via conduction, convection and radiation, for improved cooling and extended service life.
Light control
Programmable control gear with DALI protocol or 1-10 V permits more efficient light control, minimizing consumption and maximizing output. Light control is a key factor in the energy efficiency of the luminaire (see configuration chart).
Technical features
Materials:
- Body in cast aluminium with extruded aluminium profiles,
- Tempered clear glass and silicone gasket.
- Reflectors in aluminium sheet.
Maintenance: Driver installed in back of floodlight.
Enclosure: Tempered glass enclosure (5-mm thick) secured by aluminium clips.
Optical distribution: 3 optical distribution patterns:
- AS1. Asymmetric
- ST1. Intensive symmetric
- ST2. Extensive symmetric
Tilt: Stirrup mount allows the luminaire to be tilted through 90º so glass is parallel to the ground.
Electrical specification:
- CI => Electrical class I.
- Input voltage => (220-240 V) (50-60 Hz)
- Power factor >0.9
- Total harmonic distortion < 20%
Impact protection grade: As per EN 62262, impact rating IK08.
Operating temperature: -30ºC a 45ºC.
Weight with gear:
- 1 Module: 13,5Kg
- 2 Module: 35,5Kg
- 1 module: 10.9 kg
- 2 modules: 30.3 kg
LED characteristics
Light source:
- Luminaire designed for LED technology, with luminous flux between 55,000 and 123,000 lm, colour temperature 4,000 and 5,000 K.
LED technology:
- Contains 16 COB (Chip On Board) LEDs.
- All LED modules have been endurance-tested for reliability, eliminating the possibility of total LED failure. (Premature LED failure). Colour rendering index Ra > 80.
PHL Module 1
PHL Module 2
Resources / Downloads
Gallery
