PHL

Products > Applications > Sports > phl
LEDIK08 CIP65 C
The PHL luminaire is a floodlight specially designed for sports facilities: football pitches and stadiums, athletics tracks, tennis courts, etc. With latest-generation LED technology and a range of optical distribution patterns, this luminaire meets the highest standards of performance with exceptional visibility and uniformity.

Technical Data

Features
Desing
  • Specially designed for sports facilities.
  • Latest-generation LED technology.
Light source
  • Contains 16 COB (Chip On Board) LEDs. 
  • Excellent visibility and uniform spread.
Thermal control
This luminaire is designed for enhanced heat dissipation via conduction, convection and radiation, for improved cooling and extended service life.
Light control
Programmable control gear with DALI protocol or 1-10 V permits more efficient light control, minimizing consumption and maximizing output. Light control is a key factor in the energy efficiency of the luminaire (see configuration chart).
Specifications
Technical features

Materials:
  • Body in cast aluminium with extruded aluminium profiles,
  • Tempered clear glass and silicone gasket.
  • Reflectors in aluminium sheet. 
Finish: Colour C9 (RAL 9006), aluminium grey.

Maintenance: Driver installed in back of floodlight.

Enclosure: Tempered glass enclosure (5-mm thick) secured by aluminium clips.  
 
Optical distribution: 3 optical distribution patterns:
  • AS1. Asymmetric
  • ST1. Intensive symmetric
  • ST2. Extensive symmetric
Mounting: Stirrup mount.    
 
Tilt: Stirrup mount allows the luminaire to be tilted through 90º so glass is parallel to the ground. 
 
Electrical specification: 
  • CI => Electrical class I.
  • Input voltage => (220-240 V) (50-60 Hz)
  • Power factor >0.9
  • Total harmonic distortion < 20%
General watertightness: Luminaire is weatherproof to IP65 under EN 60529.

Impact protection grade: As per EN 62262, impact rating IK08.

Operating temperature: -30ºC a 45ºC.

Weight with gear:
  •  1 Module: 13,5Kg
  • 2 Module: 35,5Kg



 




 
LED characteristics

Light source:
  • Luminaire designed for LED technology, with luminous flux between 55,000 and 123,000 lm, colour temperature 4,000 and 5,000 K.

LED technology:
  • Contains 16 COB (Chip On Board) LEDs.
  • All LED modules have been endurance-tested for reliability, eliminating the possibility of total LED failure. (Premature LED failure). Colour rendering index Ra > 80.
Dimensions

Gallery

PHL 2 Modulos
553512076.jpg
shutterstock_291016598.jpg
shutterstock_384482308.jpg